
ENGLISH
• EM6570 wireless door contact
• Magnet with double-sided tape
• 3x AAA batteries
• User manual
2.0 Using the door contact
Only a few short and simple steps are necessary to mount the door contact to your
door or window and assign the door contact to your e-Centre and let the functioning of
the EM6570 begin. Use the following steps to connect the door contact.
2.1 Assign the door contact to the Eminent e-Centre
There are two possible situations when assigning the door contact to the Eminent
e-Centre.
1. You assign the door contact to the Eminent e-Centre during the installation
process of the e-Centre itself. The installation wizard of the e-Centre will move
along the 9 steps during the installation process of the e-Centre itself, meaning
you can add all your e-Domotica devices through the e-Centre’s own website.
For this installation you have to follow the steps shown on screen. Use the metal
button at the back of the door contact during the installation procedure.
2. You can add your door contact to the already installed e-Centre. This is
described in chapter ‘3.2 Adding the door contact to the already installed
e-Centre’.
2.2 Adding the door contact to the already installed
e-Centre
1. Take the door contact out of the packaging. Make sure the door contact is in
close range with the e-Centre (30 centimeter maximum)
When assigning the door contact, a shorter distance is required compared to being in
service.
2. Carefully unscrew the bottom of the door contact and carefully slide the lid off the
door contact in order to open the battery compartment.
3. The battery compartment is now open. Insert the supplied AAA batteries into the
battery compartment. Do not yet place the lid back!
4. Make sure your computer is completely started.
5. Open your computer’s web browser.
6. Fill in “http://e-Centre” in the address bar of your web browser and press the
‘Enter’ key on your keyboard.
Comentários a estes Manuais